Skip to content
Welcome to fluid-hub, the B2B hydraulics shop.
DANFOSS

Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.

DANFOSS

OMT 160 Orbital Motor 161.1 cm³/rev 200 bar Bidirectional Rotation

Code 151B3012|Orbital Motors

Built to deliver high torque at low speed with no intermediate gearbox, the OMT 160 is the entry size of the Danfoss OMT range: a hydraulic orbital motor with 161.1 cm³/rev displacement and bidirectional rotation. Its 1:10 tapered shaft and ISO Ø 160 mm standard flange make it a good fit for direct drives on wheels, winches and rotating parts under heavy loads.


Technical features:

  • Displacement: 161.1 cm³/rev
  • Maximum speed: 625 rpm in continuous operation
  • Torque at nominal pressure: 470 Nm
  • Operating pressures: 200 bar nominal pressure and 280 bar maximum peak pressure
  • Rotation: bidirectional, reversed by swapping supply and return on ports A and B
  • Mounting flange: ISO standard with Ø 160 mm pilot and 4 mounting holes
  • Shaft: Ø 45 mm tapered shaft (ISO/R775), 1:10 taper, M30x2 threaded end and B12x8x28 DIN 6885 parallel key
  • Inlet and outlet ports: 3/4" G, in-line arrangement, BSP thread
  • Drain: 1/4" G drain port; thanks to the built-in check valves the shaft seal pressure never exceeds the return line pressure, so the motor can also run without a drain line
  • Shaft support: tapered roller bearings that handle high radial and axial forces
  • Seals: NBR
  • Weight and size: 20 kg, approx. 31 x 16 x 16 cm

Typical applications:

  • Earthmoving machinery and construction equipment
  • Agricultural and forestry machinery
  • Lifting and material handling: winches, hoists and conveyors
  • Lawn and turf care machinery
  • Machine tools and stationary equipment
  • Marine equipment and special-purpose machines

TECHNICAL DETAILS

Features and data sheet

ManufacturerDANFOSS
SeriesOMT
TypeMOTORI ORBITALI
Nominal pressure (bar)200
Peak pressure (bar)280
Displacement (cm³/rev)161.1
RotationBI-DIRECTIONAL
Maximum speed (rpm)62
Torque at rated pressure (Nm)470
Drain1/4" G
Port positionIN LINEA
Seal materialsNBR
Mounting flangeISO Ø 160 mm 4B
Mounting hole thread (in/out ports)BSP
Shaft typeCONICO 1:10 M30
View data sheet

Reserved price*

Log in or register to see details

LOG IN OR REGISTER
o
REQUEST SPECIAL CONDITIONS

Related categories

Danfoss OMT 160 Orbital Motor