Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
SAIP
SI.1U.6.1.O.C7.A Bladder Accumulator 6L 360 bar
Energy storage, pulsation damping and leakage compensation are the core functions of the SI.1U.6.1.O.C7.A, a 6 L SAIP bladder accumulator for pressures up to 360 bar. Its repairable design allows the bladder to be replaced over time, extending the component's service life.
Technical features: the rubber bladder fully separates the nitrogen from the hydraulic fluid, while the top nameplate carries all the technical data needed for installation and maintenance.
- Construction type: repairable bladder accumulator, seamless cylindrical body
- Nominal volume: 6 L (effective gas volume 5.8 L)
- Maximum pressure: 360 bar
- Oil port: F. 1"1/4 BSP-P, with anti-extrusion poppet valve for the bladder
- Gas port: 5/8" UNF, for nitrogen charging with dedicated equipment
- Body material: high-strength carbon steel with RAL 9005 paint finish
- Bladder material: NBR (nitrile), for temperatures from -15 to +80 °C
- Certification: PED 2014/68/EU to EN 14359 and EN 13445-3, category III for group 2 fluids
- Maximum flow rate: 450 L/min
- Weight: 19 kg
- Mounting: vertical, inclined with the oil valve facing down, or horizontal
Typical applications:
- Hydraulic spring for vehicle and mobile machinery suspensions
- Shock absorption in case of mechanical impact
- Pulsation damping, with vertical (gas valve facing up) or horizontal mounting
- Energy storage in intermittent-duty circuits to reduce pump power
- Emergency reserve in case of motor-pump failure or power outage
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | SAIP |
| Series | SI |
| Type | BLADDER ACCUMULATOR |
| Maximum pressure (bar) | 360 |
| Body material | CARBON STEEL |
| Nominal volume (L) | 6 |
| Oil connection | F. 1"1/4 BSP-P |
| Gas connection | 5/8" UNF |
| Bladder material | NBR |
| Certification | PED |