Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
SAIP
SI.1U.35.1.O.C9.A Bladder Accumulator 35L 360 bar
Large volumes of fluid available in an instant: the SI.1U.35.1.O.C9.A is a 35 L hydraulic bladder accumulator for pressures up to 360 bar, with a maximum flow rate of 900 L/min. It is well suited to emergency reserves and circuits where volume changes must be compensated quickly.
Technical features: the maximum compression ratio of 4:1 and flow rate up to 900 L/min make effective use of the large available volume, and the bladder can be replaced at the end of its life.
- Construction type: repairable bladder accumulator, seamless cylindrical body
- Nominal volume: 35 L (effective gas volume 33.5 L)
- Maximum pressure: 360 bar
- Oil port: F. 2" BSP-P, with anti-extrusion poppet valve for the bladder
- Gas port: 5/8" UNF, for nitrogen charging with dedicated equipment
- Body material: high-strength carbon steel with RAL 9005 paint finish
- Bladder material: NBR (nitrile), for temperatures from -15 to +80 °C
- Certification: PED 2014/68/EU to EN 14359 and EN 13445-3, category IV for group 2 fluids
- Maximum flow rate: 900 L/min
- Weight: 78 kg
- Mounting: vertical, inclined with the oil valve facing down, or horizontal
Typical applications:
- Energy storage in intermittent-duty circuits to reduce pump power
- Emergency reserve in case of motor-pump failure or power outage
- Compensation of leakage losses in stationary systems
- Pressure compensator for circuit balancing
- Vibration damping in the presence of periodic oscillations
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | SAIP |
| Series | SI |
| Type | BLADDER ACCUMULATOR |
| Maximum pressure (bar) | 360 |
| Body material | CARBON STEEL |
| Nominal volume (L) | 35 |
| Oil connection | F. 2" BSP-P |
| Gas connection | 5/8" UNF |
| Bladder material | NBR |
| Certification | PED |