Skip to content
Welcome to fluid-hub, the B2B hydraulics shop.
ATOS

Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.

ATOS

QVKZOR-TEB-SN-NP-10/65/IQ ** Proportional Flow Control Valve NG10 Single Solenoid 24V DC

Code QVKZOR-TEB-SN-NP-10/65/IQ|QVKZOR-TEB-SN-NP-10/65/IQ **|Flow Control Proportional Valves

Direct-operated and pressure compensated, the proportional flow valve QVKZOR-TEB-SN-NP-10/65/IQ ** continuously modulates the hydraulic flow by means of an electronic signal. Digital electronics and position transducer are already on board: the valve is installed with just the main connector and configured via Bluetooth/USB. The zinc-plated body with black passivation exceeds 200 h in salt spray, ensuring long service life even in harsh environments.


Technical specifications:

  • Maximum operating pressure: 210 bar
  • Maximum regulated flow: 65 l/min, minimum regulated flow 85 cm³/min
  • Regulating Δp 6-8 bar; maximum flow at port A: 70 l/min
  • Mounting surface ISO 4401-05-04-0-05 (CETOP5, NG10)
  • Response time 0÷100%: 35 ms; hysteresis 0.5%, linearity 0.5%, repeatability 0.1% of maximum flow
  • 24V DC nominal supply (rectified and filtered 20÷32 V), 50 W maximum power consumption
  • 7-pin main connector (to be ordered separately), IP66/IP67 protection
  • Bluetooth/USB port for setup via the Atos CONNECT app and E-SW-SETUP PC software
  • Smart Tuning: three dynamic response settings (dynamic, balanced, smooth) selectable via software
  • Alarms for disconnected or short-circuited solenoid, current reference cable break and over/under temperature; reverse polarity protection
  • Option /I: 4÷20 mA current reference and monitor instead of the standard 0÷10 VDC, ideal for long distances or electrically noisy environments; the valve is disabled if the cable breaks
  • Option /Q: enable signal to inhibit the valve without removing power from the driver, recommended when the valve must be disabled frequently during the machine cycle
  • Standard NBR seals, fluid temperature -20°C to +60°C
  • Fixing with 4 M6x40 class 12.9 screws (15 Nm torque); port diameter A, B, P, T: Ø 11.2 mm
  • MTTFd of 150 years according to EN ISO 13849
  • CE compliance (EMC Directive 2014/30/EU), RoHS and REACH
  • Mass: 4.7 kg

Typical applications:

  • direct control of pump flow, with excess flow returned to tank through port P
  • woodworking machinery
  • industrial handling and lifting systems
  • machine tools and machining centres
  • steel and rolling mill plants

TECHNICAL DETAILS

Features and data sheet

ManufacturerATOS
SeriesQVKZOR
TypeVALVOLA PROPORZIONALE DI CONTROLLO PORTATA
Configuration2 O 3 VIE
Maximum pressure (bar)210
Maximum flow rate (l/min)65
Supply voltage (V)24V DC
Reference/communication signal0÷10V
Integrated electronicsSI
Electronics connector7 PIN
Seal materialsNBR
Mounting interface4401-05-04-0-05
View data sheet

Reserved price*

Log in or register to see details

LOG IN OR REGISTER
o
REQUEST SPECIAL CONDITIONS

Related categories

ATOS QVKZOR-TEB-SN-NP-10/65/IQ ** Proportional Flow Control Valve