Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
ATOS
QVKZOR-TEB-SN-NP-10/65 ** Proportional Flow Control Valve NG10 Single Solenoid 24V DC
Designed for hydraulic circuits where the flow must remain constant as the load changes, the QVKZOR-TEB-SN-NP-10/65 ** is a direct-operated Atos proportional flow regulator valve. The LVDT transducer and the basic integrated digital driver work together in closed loop, with 0.5% hysteresis and linearity and 0.1% repeatability. The ISO 4401 mounting surface makes installation and replacement on standard subplates and manifolds easy.
Technical specifications:
- Maximum operating pressure: 210 bar
- Maximum regulated flow: 65 l/min, minimum regulated flow 85 cm³/min
- Regulating Δp 6-8 bar; maximum flow at port A: 70 l/min
- Mounting surface ISO 4401-05-04-0-05 (CETOP5, NG10)
- Response time 0÷100%: 35 ms; hysteresis 0.5%, linearity 0.5%, repeatability 0.1% of maximum flow
- 24V DC nominal supply (rectified and filtered 20÷32 V), 50 W maximum power consumption
- Standard 0÷10 VDC reference signal, software-reconfigurable as voltage or current (±10 VDC / ±20 mA)
- 7-pin main connector (to be ordered separately), IP66/IP67 protection
- Bluetooth/USB port for setup via the Atos CONNECT app and E-SW-SETUP PC software
- Smart Tuning: three dynamic response settings (dynamic, balanced, smooth) selectable via software
- Alarms for disconnected or short-circuited solenoid, current reference cable break and over/under temperature; reverse polarity protection
- Standard NBR seals, fluid temperature -20°C to +60°C
- MTTFd of 150 years according to EN ISO 13849
- CE compliance (EMC Directive 2014/30/EU), RoHS and REACH
- Fixing with 4 M6x40 class 12.9 screws (15 Nm torque); port diameter A, B, P, T: Ø 11.2 mm
- Mass: 4.7 kg
Typical applications:
- speed control of hydraulic cylinders and motors in a specific branch of the circuit
- industrial handling and lifting systems
- machine tools and machining centres
- steel and rolling mill plants
- hydraulic presses for controlled-speed operations
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | ATOS |
| Series | QVKZOR |
| Type | VALVOLA PROPORZIONALE DI CONTROLLO PORTATA |
| Configuration | 2 O 3 VIE |
| Maximum pressure (bar) | 210 |
| Maximum flow rate (l/min) | 65 |
| Supply voltage (V) | 24V DC |
| Reference/communication signal | 0÷10V |
| Integrated electronics | SI |
| Electronics connector | 7 PIN |
| Seal materials | NBR |
| Mounting interface | 4401-05-04-0-05 |