Skip to content
Welcome to fluid-hub, the B2B hydraulics shop.
ATOS

Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.

ATOS

QVKZA-TES-SN-NP-10/90/M/I ** /PE ATEX Proportional Flow Control Valve NG10 Single Solenoid 24V DC

Code QVKZA-TES-SN-NP-10/90/M/I 21 /PE|QVKZA-TES-SN-NP-10/90/M/I ** /PE|Flow Control Proportional Valves

For the most demanding applications in ATEX zones, the QVKZA-TES-SN-NP-10/90/M/I ** /PE pairs an integral digital driver with an LVDT transducer for high-performance closed-loop flow regulation, with hysteresis ≤ 0.5%. This single solenoid NG10 valve comes with FKM seals and 4 to 20 mA current reference.


Technical specifications:

  • Mounting interface: ISO 4401-05-04-0-05, size NG10
  • Maximum operating pressure: 210 bar
  • Maximum regulated flow: 90 l/min, with minimum regulated flow of 100 cm³/min and regulating Δp of 10-12 bar
  • Maximum flow at port A: 100 l/min
  • Built-in pressure compensator: steady flow regardless of load changes, usable in 2-way or 3-way connection
  • Response time ≤ 45 ms; hysteresis ≤ 0,5%, linearity ≤ 0,5% and repeatability ≤ 0,1% of maximum regulated flow
  • ATEX, IECEx, EAC and CCC multicertification for gas group II 2G and dust category II 2D: Ex db IIC T6/T5/T4 flameproof housing and Ex tb IIIC protection
  • Integral digital driver and explosion-proof LVDT position transducer: high-performance closed-loop regulation, nominal 24 VDC power supply
  • SN version, without alternated p/Q controls
  • NP version without fieldbus interface: controlled via analog signals on the terminal board
  • Built-in diagnostics with alarms (solenoid disconnected or short-circuited, over/under temperature, supply voltage level) and Fault output
  • Quick setup via Bluetooth or USB (5-pin M12 connector) with the Atos CONNECT app and E-SW-SETUP software
  • Cable entry with M20x1.5 threaded connection (cable glands to be ordered separately)
  • Ambient temperature: -20°C to +60°C
  • MTTFd 150 years according to EN ISO 13849; zinc plating with black passivation, salt spray test > 200 h; RoHS and REACH compliant
  • Weight: 9 kg
  • Option /I: 4 to 20 mA current reference and monitor, for more robust signal transmission over long distances
  • Option /PE: FKM seals, recommended fluid temperature -20°C to +80°C

Typical applications:

  • refineries and petrochemical plants
  • chemical and pharmaceutical industry with classified zones
  • combustible dust processing plants, such as silos and mills
  • hydraulic power units installed in explosive atmospheres

TECHNICAL DETAILS

Features and data sheet

ManufacturerATOS
SeriesQVKZA
TypeVALVOLA PROPORZIONALE DI CONTROLLO PORTATA ATEX
Configuration2 O 3 VIE
Maximum pressure (bar)210
Maximum flow rate (l/min)90
Supply voltage (V)24V DC
ConnectorM20x1.5
Reference/communication signal4÷20mA
Integrated electronicsSI
Electronics connector5 PIN, M12
Seal materialsFKM
Mounting interface4401-05-04-0-05
View data sheet

Reserved price*

Log in or register to see details

LOG IN OR REGISTER
o
REQUEST SPECIAL CONDITIONS

Related categories

ATOS QVKZA-TES-SN-NP-10/90/M/I ** /PE ATEX Proportional Flow Control Valve