Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
ATOS
QVHZO-TES-SN-NP-06/45/I ** /PE Proportional Flow Control Valve NG06 Single Solenoid 24V DC
Within the Atos range of proportional flow valves, the QVHZO-TES-SN-NP-06/45/I ** /PE stands out for its built-in pressure compensation, which keeps the set flow independent of downstream pressure variations. The integrated full digital driver works together with the LVDT transducer for precise regulation, with advanced settings and diagnostics. Single solenoid, with CETOP3 NG06 subplate interface (ISO 4401) and 24V DC power supply, it fits easily into standard circuits and manifolds.
Technical specifications:
- Maximum regulated flow: 45 l/min, with minimum regulated flow of 60 cm³/min
- Maximum operating pressure: 210 bar
- Regulating Δp of 15 bar ensured by the mechanical compensator, for flow independent of load conditions
- Mounting surface: ISO 4401-03-02-0-05 (CETOP3, NG06), installation in any position
- LVDT position transducer for high accuracy in flow regulation
- Response time 25 ms; hysteresis and linearity 0.5%, repeatability 0.1% of max flow; thermal drift < 1% at ΔT = 40°C
- Integrated digital driver, full version, 24V DC power supply, max power consumption 50 W
- 7-pin main connector, IP66/IP67 protection with connectors correctly fitted
- Bluetooth/USB connection for settings and diagnostics via the Atos CONNECT app and E-SW-SETUP PC software
- Analogue reference signal, standard 0÷10 VDC, reconfigurable via software as voltage or current
- Smart Tuning: three factory settings (dynamic, balanced, smooth) to adapt valve response to the application
- 3 LEDs for on-board diagnostics
- Diagnostic alarms for solenoid disconnected or short-circuited, reference cable break and over-temperature
- FKM seals (option /PE), fluid temperature -20°C to +80°C
- Option /I: 4÷20 mA current reference and monitor, suited to long distances or electrically noisy environments
- Fastening with 4 M5x50 class 12.9 screws (tightening torque 8 Nm) and 4 OR 108 seals
- MTTFd 150 years according to EN ISO 13849; salt spray corrosion resistance (EN ISO 9227) > 200 h
- CE compliance (EMC Directive 2014/30/EU), RoHS and REACH
- Weight: 3 kg
Typical applications:
- direct pump flow control in hydraulic power units
- packaging machinery
- industrial hydraulic presses
- woodworking machinery
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | ATOS |
| Series | QVHZO |
| Type | VALVOLA PROPORZIONALE DI CONTROLLO PORTATA |
| Configuration | 2 O 3 VIE |
| Maximum pressure (bar) | 210 |
| Maximum flow rate (l/min) | 45 |
| Supply voltage (V) | 24V DC |
| Reference/communication signal | 4÷20mA |
| Integrated electronics | SI |
| Electronics connector | 7 PIN |
| Seal materials | FKM |
| Mounting interface | 4401-03-02-0-05 |