Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
ATOS
QVHZO-TEB-SN-NP-06/12 ** Proportional Flow Control Valve NG06 Single Solenoid 24V DC
When fine, continuous speed regulation of hydraulic cylinders and motors is required, the Atos QVHZO-TEB-SN-NP-06/12 ** is a reliable and versatile pressure-compensated proportional flow valve. The integrated basic digital driver and the LVDT transducer work together for precise, repeatable flow regulation. This single solenoid valve installs on an ISO 4401 CETOP3 (NG06) mounting surface and 24V DC power supply.
Technical specifications:
- Maximum regulated flow: 12 l/min, with minimum regulated flow of 20 cm³/min
- Maximum operating pressure: 210 bar
- Regulating Δp of 4-6 bar ensured by the mechanical compensator, for flow independent of load conditions
- Mounting surface: ISO 4401-03-02-0-05 (CETOP3, NG06), installation in any position
- LVDT position transducer for high accuracy in flow regulation
- Response time 25 ms; hysteresis and linearity 0.5%, repeatability 0.1% of max flow; thermal drift < 1% at ΔT = 40°C
- Integrated digital driver, basic version, 24V DC power supply, max power consumption 50 W
- 7-pin main connector, IP66/IP67 protection with connectors correctly fitted
- Bluetooth/USB connection for settings and diagnostics via the Atos CONNECT app and E-SW-SETUP PC software
- Analogue reference signal, standard 0÷10 VDC, reconfigurable via software as voltage or current
- Smart Tuning: three factory settings (dynamic, balanced, smooth) to adapt valve response to the application
- Diagnostic alarms for solenoid disconnected or short-circuited, reference cable break and over-temperature
- Standard NBR seals, fluid temperature -20°C to +60°C
- Fastening with 4 M5x50 class 12.9 screws (tightening torque 8 Nm) and 4 OR 108 seals
- MTTFd 150 years according to EN ISO 13849; salt spray corrosion resistance (EN ISO 9227) > 200 h
- CE compliance (EMC Directive 2014/30/EU), RoHS and REACH
- Weight: 3 kg
Typical applications:
- direct pump flow control in hydraulic power units
- glass and ceramics processing machines
- die-casting machines
- hydraulic test benches
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | ATOS |
| Series | QVHZO |
| Type | VALVOLA PROPORZIONALE DI CONTROLLO PORTATA |
| Configuration | 2 O 3 VIE |
| Maximum pressure (bar) | 210 |
| Maximum flow rate (l/min) | 12 |
| Supply voltage (V) | 24V DC |
| Reference/communication signal | 0÷10V |
| Integrated electronics | SI |
| Electronics connector | 7 PIN |
| Seal materials | NBR |
| Mounting interface | 4401-03-02-0-05 |