Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
ATOS
QVHZO-AES-BC-06/12/Z ** Proportional Flow Control Valve NG06 Single Solenoid 24V DC
Designed for users who need precise control of actuator speed, the QVHZO-AES-BC-06/12/Z ** is a pressure-compensated proportional flow control valve from the Atos range. The integrated full digital driver includes the CANopen fieldbus interface for digital reference, valve settings and real-time diagnostics. The valve is single solenoid, with NG06 mounting interface to ISO 4401 (CETOP3) and 24V DC power supply.
Technical specifications:
- Maximum regulated flow: 12 l/min, with minimum regulated flow of 20 cm³/min
- Maximum operating pressure: 210 bar
- Regulating Δp of 4-6 bar ensured by the mechanical compensator, for flow independent of load conditions
- Mounting surface: ISO 4401-03-02-0-05 (CETOP3, NG06), installation in any position
- Performance with Atos drivers: response time ≤ 30 ms, hysteresis ≤ 5%, linearity ≤ 3%, repeatability ≤ 1% of max flow
- Integrated digital driver, full version, 24V DC power supply, max power consumption 50 W
- 12-pin main connector, IP66/IP67 protection with connectors correctly fitted
- Bluetooth/USB connection for settings and diagnostics via the Atos CONNECT app and E-SW-SETUP PC software
- CANopen fieldbus interface for digital reference, settings and real-time diagnostics
- Diagnostic alarms for solenoid disconnected or short-circuited, reference cable break and over-temperature
- Standard NBR seals, fluid temperature -20°C to +60°C
- Option /Z: 12-pin main connector with Fault output signal, enable signal and separate power supply for logic and communication
- Fastening with 4 M5x50 class 12.9 screws (tightening torque 8 Nm) and 4 OR 108 seals
- MTTFd 150 years according to EN ISO 13849; salt spray corrosion resistance (EN ISO 9227) > 200 h
- CE compliance (EMC Directive 2014/30/EU), RoHS and REACH
- Weight: 3 kg
Typical applications:
- direct pump flow control in hydraulic power units
- industrial automation lines
- rubber and tyre machinery
- automated lines with centralised fieldbus control
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | ATOS |
| Series | QVHZO |
| Type | VALVOLA PROPORZIONALE DI CONTROLLO PORTATA |
| Configuration | 2 O 3 VIE |
| Maximum pressure (bar) | 210 |
| Maximum flow rate (l/min) | 12 |
| Supply voltage (V) | 24V DC |
| Reference/communication signal | CANopen |
| Integrated electronics | SI |
| Electronics connector | 12 PIN |
| Seal materials | NBR |
| Mounting interface | 4401-03-02-0-05 |