Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
ATOS
QVHZO-A-06/3/18 ** Proportional Flow Control Valve NG06 Single Solenoid 12V DC
Compact and direct-acting, the QVHZO-A-06/3/18 ** is an Atos proportional flow control valve that converts the reference signal into a stable, repeatable regulated flow. In this version the valve has no transducer and is paired with separate electronic drivers for open-loop regulation. The valve is single solenoid, with NG06 mounting interface to ISO 4401 (CETOP3).
Technical specifications:
- Maximum adjustable flow 3.5 l/min; minimum adjustable flow 15 cm³/min
- Maximum operating pressure: 210 bar
- Regulating Δp of 4-6 bar ensured by the mechanical compensator, for flow independent of load conditions
- Mounting surface: ISO 4401-03-02-0-05 (CETOP3, NG06), installation in any position
- Performance with Atos drivers: response time ≤ 30 ms, hysteresis ≤ 5%, linearity ≤ 3%, repeatability ≤ 1% of max flow
- Max power consumption 30 W, continuous duty ED 100%
- DIN 43650 connector on the solenoid, IP65 protection degree
- Can be paired with separate Atos analogue (E-MI-AC-01F) and digital (E-MI-AS-IR, E-BM-AS-PS, E-BM-AES) drivers
- Standard manual override protected by a rubber cap
- Standard NBR seals, fluid temperature -20°C to +80°C
- Option /18: optional coil for low-current electronic drivers not supplied by Atos (max current 1.2 A)
- Fastening with 4 M5x50 class 12.9 screws (tightening torque 8 Nm) and 4 OR 108 seals
- MTTFd 150 years according to EN ISO 13849; salt spray corrosion resistance (EN ISO 9227) > 200 h
- CE compliance (EMC Directive 2014/30/EU), RoHS and REACH
- Weight: 2 kg
Typical applications:
- flow regulation in a specific section of the hydraulic circuit
- glass and ceramics processing machines
- die-casting machines
- hydraulic test benches
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | ATOS |
| Series | QVHZO |
| Type | VALVOLA PROPORZIONALE DI CONTROLLO PORTATA |
| Configuration | 2 O 3 VIE |
| Maximum pressure (bar) | 210 |
| Maximum flow rate (l/min) | 3.5 |
| Voltage (V) | 12 |
| Current type | DC |
| Connector | DIN 43650 |
| Integrated electronics | NO |
| Seal materials | NBR |
| Mounting interface | 4401-03-02-0-05 |