Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
KAWASAKI
M7V212AD48-AA1H2XXXN-01 Variable Displacement Piston Motor 212 cm³/rev 420 bar Reversible Rotation
Built for demanding hydrostatic drives, the M7V212AD48-AA1H2XXXN-01 is a KAWASAKI M7V series variable displacement axial piston motor with swash plate design and 212 cm³/rev displacement. Its pressure related control with pressure increase matches displacement to the load automatically: high speed when torque demand is low, full thrust when the going gets tough.
Technical features:
- Displacement and speed: 212 cm³/rev with a maximum speed of 5600 rpm
- Operating pressures: 420 bar nominal pressure and 500 bar maximum peak pressure, for high power density
- Load-sensitive regulation: the motor runs at minimum displacement until the operating pressure reaches the control start setting (factory set at 100 bar), then increases displacement until the required torque is delivered; if maximum displacement is not enough, pressure rises until the load is overcome
- Reversible rotation: bi-directional operation, suitable for both open and closed circuits
- Mounting flange: ISO 3019-2 with Ø 160 mm pilot and 4-bolt mounting
- Shaft: DIN 5480 W50x2x24x9g splined shaft
- Inlet and outlet ports: 1" SAE 6000 flanged ports at the side, with UNC fixing-hole threads
- Drain: 1"1/16-12UN-2B drain port, to be connected directly to the tank
- Internal cooling: version without flushing valve, where part of the low-pressure oil is routed into the casing to cool the rotating group
- Seals: NBR
- Swash plate advantages: low noise, compact size and long bearing life
Typical applications:
- Travel drives for construction and earthmoving machinery
- Wheel loaders and machines alternating fast travel with high-load pushing
- Industrial vehicles with hydrostatic transmission
- High-power variable speed drives in closed circuits
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | KAWASAKI |
| Series | M7V |
| Type | MOTORI A PISTONI A PORTATA VARIABILE |
| Nominal pressure (bar) | 420 |
| Peak pressure (bar) | 500 |
| Displacement (cm³/rev) | 212 |
| Rotation | BI-DIRECTIONAL |
| Maximum speed (rpm) | 5600 |
| Torque at rated pressure (Nm) | 749 |
| Drain | 1"1/16-12UN-2B |
| Port position | SIDE |
| Pressure regulator | CONTROLLO CORRELATO ALLA PRESSIONE - CON AUMENTO DELLA PRESSIONE |
| Seal materials | NBR |
| Mounting flange | ISO 3019/2 Ø 160 mm 4B |
| Mounting hole thread (in/out ports) | UNC |
| Shaft type | DIN5480 W50x2x24x9g |