Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
SAIP
LA.1.0,75.1.O.M8.A Bladder Accumulator 0.75L 250 bar
When the circuit uses metric fittings, the LA.1.0,75.1.O.M8.A delivers the same design as the 0.75 L SAIP bladder accumulator with an F. M18x1,5 oil port. It works as a hydraulic spring: the nitrogen inside the bladder is compressed as system pressure rises and pushes the fluid back as it falls, up to a maximum pressure of 250 bar.
Technical features: the seamless high-strength steel body and the top-replaceable bladder ensure long service life and quick maintenance.
- Construction: bladder accumulator with seamless cylindrical body, repairable
- Nominal volume: 0.75 L (effective gas volume 0.90 L)
- Maximum pressure: 250 bar
- Oil port: F. M18x1,5 with metric thread
- Gas port: 5/8" UNF, for nitrogen charging
- Body material: seamless carbon steel, standard RAL 9005 finish over a two-component anti-corrosion primer
- Bladder material: NBR (nitrile), temperature range from -15 to +80 °C
- Certification: PED 2014/68/EU
- Mounting: vertical, inclined with the oil valve facing down, or horizontal; in the last two positions effective volume and maximum flow rate are reduced
- Weight: 4.4 kg
Typical applications:
- Pressure compensator for circuit balancing
- Vibration damping in case of periodic oscillations
- Volume compensation as pressure and temperature change
- Emergency reserve in case of motor-pump failure or power outage
- Mobile machinery and stationary systems with metric fittings
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | SAIP |
| Series | LA |
| Type | BLADDER ACCUMULATOR |
| Maximum pressure (bar) | 250 |
| Body material | CARBON STEEL |
| Nominal volume (L) | 0.75 |
| Oil connection | F. M18x1,5 |
| Gas connection | 5/8" UNF |
| Bladder material | NBR |
| Certification | PED |