Skip to content
Welcome to fluid-hub, the B2B hydraulics shop.
HYDRAUT

Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.

HYDRAUT

HYR900H/18 Filling Valve DN 250 350 bar 10,000 l/min with Fixing Holes

Code HYR900H/18|Filling Valves

When a press cylinder has to fill up fast, the Hydraut HYR900H/18 prefill valve DN 250 lets oil through with low pressure drop. Hydraulic piloting through the PP port, at 8 to 100 bar, commands opening for fast discharge once the cylinder has been decompressed. The H version has fixing holes machined directly into the body for faster installation.


Technical features:

  • Nominal size DN 250 with maximum flow of 10,000 l/min
  • Maximum operating pressure: 350 bar
  • Opening ratio: 4.0:1
  • Pilot pressure: minimum 8 bar, maximum 100 bar
  • Minimum suction opening pressure: 0.12 bar ±10%
  • Pilot volume: 475.17 cm³
  • Connections: IN port on tank side, OUT port on cylinder side, PP pilot port and P auxiliary pressure port
  • P and PP port thread: 1/2" BSP
  • Pilot port extension to be ordered separately
  • Conical poppet seat preventing leakage during pressing
  • Steel construction suited to intensive cycles
  • NBR seals with KANTSEAL square ring DKAR00457-N90
  • Vertical mounting only
  • Fixing holes in the body: 20 holes Ø 43 mm
  • Body outer diameter: 530 mm
  • Fluid temperature: -20 °C to +75 °C
  • Weight: 230 kg
  • 24-month Hydraut warranty

Typical applications:

  • large-tonnage vertical presses
  • revamping and maintenance of existing presses
  • hydraulic power units for double-acting presses
  • hydraulic compression presses

TECHNICAL DETAILS

Features and data sheet

ManufacturerHYDRAUT
SeriesHYR
TypeVALVOLA DI RIEMPIMENTO
Maximum pressure (bar)350
Maximum flow rate (l/min)10000
Seal materialsNBR
Mounting interfaceDN 250
View data sheet

Reserved price*

Log in or register to see details

LOG IN OR REGISTER
o
REQUEST SPECIAL CONDITIONS

Related categories