Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
HYDRAUT
HYR800H/18 Filling Valve DN 200 350 bar 7000 l/min with Fixing Holes
Designed for direct mounting between tank and cylinder, the HYR800H/18 is a Hydraut DN 200 filling valve with a straightforward design. The conical seat of the poppet ensures perfect sealing during pressing, while pilot-operated opening allows fast oil discharge to the tank at the end of the cycle. The H version has fixing holes machined directly into the body for faster installation.
Technical features:
- Nominal size DN 200 with maximum flow of 7000 l/min
- Maximum operating pressure: 350 bar
- Opening ratio: 4.0:1
- Pilot pressure: minimum 8 bar, maximum 100 bar
- Minimum suction opening pressure: 0.12 bar ±10%
- Pilot volume: 235.62 cm³
- Four ports: IN to the tank, OUT to the cylinder, PP for piloting and P for auxiliary pressure
- P and PP port thread: 1/2" BSP
- Pilot port extension to be ordered separately
- Conical-seat poppet for perfect sealing
- Steel valve body
- NBR seals with KANTSEAL square ring DKAR00452-N70
- Vertical mounting only
- Fixing holes in the body: 16 holes Ø 37 mm
- Body outer diameter: 420 mm
- Fluid temperature: -20 °C to +75 °C
- Weight: 102 kg
- 24-month Hydraut warranty
Typical applications:
- forging presses
- powder compaction presses
- rubber and plastics presses
- sheet metal deep drawing presses
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | HYDRAUT |
| Series | HYR |
| Type | VALVOLA DI RIEMPIMENTO |
| Maximum pressure (bar) | 350 |
| Maximum flow rate (l/min) | 7000 |
| Seal materials | NBR |
| Mounting interface | DN 200 |