Skip to content
Welcome to fluid-hub, the B2B hydraulics shop.
HYDRAUT

Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.

HYDRAUT

HYR800/18 Filling Valve DN 200 350 bar 7000 l/min

Code HYR800/18|Filling Valves

The Hydraut HYR800/18 filling valve DN 200 connects the tank to the press cylinder, allowing it to be filled and emptied quickly. On suction, oil flows from the tank side (IN) to the cylinder side (OUT), while during pressing the conical-seat poppet shuts the passage tightly. Vertical mounting is required for this size.


Technical features:

  • Nominal size DN 200 with maximum flow of 7000 l/min
  • Maximum operating pressure: 350 bar
  • Opening ratio: 4.0:1
  • Pilot pressure: minimum 8 bar, maximum 100 bar
  • Minimum suction opening pressure: 0.12 bar ±10%
  • Pilot volume: 235.62 cm³
  • Connections: IN port on tank side, OUT port on cylinder side, PP pilot port and P auxiliary pressure port
  • P and PP port thread: 1/2" BSP
  • Pilot port extension to be ordered separately
  • Tight shut-off thanks to the conical-seat poppet
  • Rugged, durable steel body
  • NBR seals with KANTSEAL square ring DKAR00455-N70
  • Vertical mounting only
  • Body outer diameter: 420 mm
  • Fluid temperature: -20 °C to +75 °C
  • Weight: 116 kg
  • 24-month Hydraut warranty

Typical applications:

  • large-tonnage vertical presses
  • cold and hot forming presses
  • blanking presses
  • composite material presses

TECHNICAL DETAILS

Features and data sheet

ManufacturerHYDRAUT
SeriesHYR
TypeVALVOLA DI RIEMPIMENTO
Maximum pressure (bar)350
Maximum flow rate (l/min)7000
Seal materialsNBR
Mounting interfaceDN 200
View data sheet

Reserved price*

Log in or register to see details

LOG IN OR REGISTER
o
REQUEST SPECIAL CONDITIONS

Related categories