Skip to content
Welcome to fluid-hub, the B2B hydraulics shop.
HYDRAUT

Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.

HYDRAUT

HYR600/18 Filling Valve DN 160 400 bar 4000 l/min

Code HYR600/18|Filling Valves

For anyone designing or overhauling a hydraulic press, the Hydraut HYR600/18 filling valve DN 160 is a simple way to speed up the working cycle. The poppet opens on suction with as little as 0.12 bar and closes again during pressing, isolating the cylinder from the tank. Vertical mounting is required for this size.


Technical features:

  • Nominal size DN 160 with maximum flow of 4000 l/min
  • Maximum operating pressure: 400 bar
  • Opening ratio: 4.3:1
  • Pilot pressure: minimum 8 bar, maximum 100 bar
  • Minimum suction opening pressure: 0.12 bar ±10%
  • Pilot volume: 142.39 cm³
  • Four ports: IN to the tank, OUT to the cylinder, PP for piloting and P for auxiliary pressure
  • P and PP port thread: 1/2" BSP
  • Pilot port extension to be ordered separately
  • Conical poppet seat preventing leakage during pressing
  • Steel construction suited to intensive cycles
  • NBR seals with KANTSEAL square ring DKAR00447-N70
  • Vertical mounting only
  • Body outer diameter: 310 mm
  • Fluid temperature: -20 °C to +75 °C
  • Weight: 42 kg
  • 24-month Hydraut warranty

Typical applications:

  • forging presses
  • hydraulic power units for double-acting presses
  • hydraulic compression presses
  • press brakes

TECHNICAL DETAILS

Features and data sheet

ManufacturerHYDRAUT
SeriesHYR
TypeVALVOLA DI RIEMPIMENTO
Maximum pressure (bar)400
Maximum flow rate (l/min)4000
Seal materialsNBR
Mounting interfaceDN 160
View data sheet

Reserved price*

Log in or register to see details

LOG IN OR REGISTER
o
REQUEST SPECIAL CONDITIONS

Related categories