Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
HYDRAUT
HYR500 Filling Valve DN 125 400 bar 2500 l/min
The HYR500 belongs to the Hydraut HYR series, a range of DN 125 quick filling and discharging valves for hydraulic press cylinders. During the fast descent the cylinder draws oil from the tank through the valve; opening via the PP pilot port must only be commanded after the cylinder pressure has been discharged. Vertical mounting is required for this size.
Technical features:
- Nominal size DN 125 with maximum flow of 2500 l/min
- Maximum operating pressure: 400 bar
- Opening ratio: 4.3:1
- Pilot pressure: minimum 8 bar, maximum 100 bar
- Minimum suction opening pressure: 0.12 bar ±10%
- Pilot volume: 67.86 cm³
- Connections: IN port on tank side, OUT port on cylinder side, PP pilot port and P auxiliary pressure port
- P and PP port thread: 3/8" BSP
- Pilot port extension included in the supply
- Conical-seat poppet for perfect sealing
- Steel valve body
- NBR seals with KANTSEAL square ring DKAR00442-N90
- Vertical mounting only
- Available on request with 1 or 2 flanges (1FL and 2FL versions)
- Body outer diameter: 248 mm
- Fluid temperature: -20 °C to +75 °C
- Weight: 20 kg
- 24-month Hydraut warranty
Typical applications:
- large-tonnage vertical presses
- rubber and plastics presses
- sheet metal deep drawing presses
- revamping and maintenance of existing presses
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | HYDRAUT |
| Series | HYR |
| Type | VALVOLA DI RIEMPIMENTO |
| Maximum pressure (bar) | 400 |
| Maximum flow rate (l/min) | 2500 |
| Seal materials | NBR |
| Mounting interface | DN 125 |