Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
HYDRAUT
HYR400/PA Filling Valve DN 100 400 bar 1600 l/min with Decompression
Compact and rugged, the Hydraut HYR400/PA prefill valve DN 100 enables quick pre-filling of the main press cylinder. Hydraulic piloting through the PP port, at 8 to 100 bar, commands opening for fast discharge once the cylinder has been decompressed. The /PA version features a pre-opening device, allowing gradual decompression of the cylinder before full opening.
Technical features:
- Nominal size DN 100 with maximum flow of 1600 l/min
- Maximum operating pressure: 400 bar
- Opening ratio: 4.3:1
- /PA option: pre-opening device for cylinder decompression
- Decompression ratio: 1:5
- Pilot pressure: minimum 8 bar, maximum 100 bar
- Minimum suction opening pressure: 0.12 bar ±10%
- Pilot volume: 28.63 cm³
- Four ports: IN to the tank, OUT to the cylinder, PP for piloting and P for auxiliary pressure
- P and PP port thread: 3/8" BSP
- Pilot port extension included in the supply
- Tight shut-off thanks to the conical-seat poppet
- Rugged, durable steel body
- NBR seals with KANTSEAL square ring DKAR00433-N90
- Vertical mounting only
- Available on request with 1 or 2 flanges (1FL and 2FL versions)
- Body outer diameter: 212 mm
- Fluid temperature: -20 °C to +75 °C
- Weight: 12 kg
- 24-month Hydraut warranty
Typical applications:
- blanking presses
- composite material presses
- powder compaction presses
- rubber and plastics presses
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | HYDRAUT |
| Series | HYR |
| Type | VALVOLA DI RIEMPIMENTO |
| Maximum pressure (bar) | 400 |
| Maximum flow rate (l/min) | 1600 |
| Seal materials | NBR |
| Mounting interface | DN 100 |
| Technical notes | CON DECOMPRESSIONE |