Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
HYDRAUT
HYR300/PA Filling Valve DN 80 400 bar 1000 l/min with Decompression
The HYR300/PA is a Hydraut DN 80 filling valve that reliably handles large oil flows between tank and cylinder. On suction, oil flows from the tank side (IN) to the cylinder side (OUT), while during pressing the conical-seat poppet shuts the passage tightly. The /PA version features a pre-opening device, allowing gradual decompression of the cylinder before full opening.
Technical features:
- Nominal size DN 80 with maximum flow of 1000 l/min
- Maximum operating pressure: 400 bar
- Opening ratio: 4.5:1
- /PA option: pre-opening device for cylinder decompression
- Decompression ratio: 1:5
- Pilot pressure: minimum 8 bar, maximum 100 bar
- Minimum suction opening pressure: 0.12 bar ±10%
- Pilot volume: 12.72 cm³
- Four ports: IN to the tank, OUT to the cylinder, PP for piloting and P for auxiliary pressure
- P and PP port thread: 1/4" BSP
- Pilot port extension included in the supply
- Conical-seat poppet for perfect sealing
- Steel valve body
- NBR seals with KANTSEAL square ring DKAR00350-N90
- Vertical mounting only
- Available on request with 1 or 2 flanges (1FL and 2FL versions)
- Body outer diameter: 169 mm
- Fluid temperature: -20 °C to +75 °C
- Weight: 5.2 kg
- 24-month Hydraut warranty
Typical applications:
- sheet metal deep drawing presses
- revamping and maintenance of existing presses
- hydraulic power units for double-acting presses
- hydraulic compression presses
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | HYDRAUT |
| Series | HYR |
| Type | VALVOLA DI RIEMPIMENTO |
| Maximum pressure (bar) | 400 |
| Maximum flow rate (l/min) | 1000 |
| Seal materials | NBR |
| Mounting interface | DN 80 |
| Technical notes | CON DECOMPRESSIONE |