Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
HYDRAUT
HYR300 Filling Valve DN 80 400 bar 1000 l/min
The Hydraut HYR300 is a DN 80 filling valve combining high flow capacity and reliable sealing in a steel body. The poppet opens on suction with as little as 0.12 bar and closes again during pressing, isolating the cylinder from the tank. Vertical mounting is required for this size.
Technical features:
- Nominal size DN 80 with maximum flow of 1000 l/min
- Maximum operating pressure: 400 bar
- Opening ratio: 4.5:1
- Pilot pressure: minimum 8 bar, maximum 100 bar
- Minimum suction opening pressure: 0.12 bar ±10%
- Pilot volume: 12.72 cm³
- Connections: IN port on tank side, OUT port on cylinder side, PP pilot port and P auxiliary pressure port
- P and PP port thread: 1/4" BSP
- Pilot port extension included in the supply
- Tight shut-off thanks to the conical-seat poppet
- Rugged, durable steel body
- NBR seals with KANTSEAL square ring DKAR00350-N90
- Vertical mounting only
- Available on request with 1 or 2 flanges (1FL and 2FL versions)
- Body outer diameter: 169 mm
- Fluid temperature: -20 °C to +75 °C
- Weight: 5.2 kg
- 24-month Hydraut warranty
Typical applications:
- composite material presses
- powder compaction presses
- rubber and plastics presses
- sheet metal deep drawing presses
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | HYDRAUT |
| Series | HYR |
| Type | VALVOLA DI RIEMPIMENTO |
| Maximum pressure (bar) | 400 |
| Maximum flow rate (l/min) | 1000 |
| Seal materials | NBR |
| Mounting interface | DN 80 |