Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
HYDRAUT
HYR212/PA Filling Valve DN 63 400 bar 600 l/min with Decompression
When a press cylinder has to fill up fast, the Hydraut HYR212/PA prefill valve DN 63 lets oil through with low pressure drop. During the fast descent the cylinder draws oil from the tank through the valve; opening via the PP pilot port must only be commanded after the cylinder pressure has been discharged. The /PA version features a pre-opening device, allowing gradual decompression of the cylinder before full opening.
Technical features:
- Nominal size DN 63 with maximum flow of 600 l/min
- Maximum operating pressure: 400 bar
- Opening ratio: 4.2:1
- /PA option: pre-opening device for cylinder decompression
- Decompression ratio: 1:5
- Pilot pressure: minimum 8 bar, maximum 100 bar
- Minimum suction opening pressure: 0.12 bar ±10%
- Pilot volume: 8.13 cm³
- Four ports: IN to the tank, OUT to the cylinder, PP for piloting and P for auxiliary pressure
- P and PP port thread: 1/4" BSP
- Pilot port extension included in the supply
- Conical poppet seat preventing leakage during pressing
- Steel construction suited to intensive cycles
- NBR seals with KANTSEAL square ring DKAR00343-N90
- Vertical or horizontal mounting
- Available on request with 1 or 2 flanges (1FL and 2FL versions)
- Body outer diameter: 143 mm
- Fluid temperature: -20 °C to +75 °C
- Weight: 3.5 kg
- 24-month Hydraut warranty
Typical applications:
- press brakes
- cold and hot forming presses
- blanking presses
- composite material presses
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | HYDRAUT |
| Series | HYR |
| Type | VALVOLA DI RIEMPIMENTO |
| Maximum pressure (bar) | 400 |
| Maximum flow rate (l/min) | 600 |
| Seal materials | NBR |
| Mounting interface | DN 63 |
| Technical notes | CON DECOMPRESSIONE |