Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
HYDRAUT
HYR212 Filling Valve DN 63 400 bar 600 l/min
Designed for direct mounting between tank and cylinder, the HYR212 is a Hydraut DN 63 filling valve with a straightforward design. Hydraulic piloting through the PP port, at 8 to 100 bar, commands opening for fast discharge once the cylinder has been decompressed. It can be installed either vertically or horizontally.
Technical features:
- Nominal size DN 63 with maximum flow of 600 l/min
- Maximum operating pressure: 400 bar
- Opening ratio: 4.2:1
- Pilot pressure: minimum 8 bar, maximum 100 bar
- Minimum suction opening pressure: 0.12 bar ±10%
- Pilot volume: 8.13 cm³
- Connections: IN port on tank side, OUT port on cylinder side, PP pilot port and P auxiliary pressure port
- P and PP port thread: 1/4" BSP
- Pilot port extension included in the supply
- Conical-seat poppet for perfect sealing
- Steel valve body
- NBR seals with KANTSEAL square ring DKAR00343-N90
- Vertical or horizontal mounting
- Available on request with 1 or 2 flanges (1FL and 2FL versions)
- Body outer diameter: 143 mm
- Fluid temperature: -20 °C to +75 °C
- Weight: 3.5 kg
- 24-month Hydraut warranty
Typical applications:
- revamping and maintenance of existing presses
- hydraulic power units for double-acting presses
- hydraulic compression presses
- press brakes
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | HYDRAUT |
| Series | HYR |
| Type | VALVOLA DI RIEMPIMENTO |
| Maximum pressure (bar) | 400 |
| Maximum flow rate (l/min) | 600 |
| Seal materials | NBR |
| Mounting interface | DN 63 |