Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
HYDRAUT
HYR200 Filling Valve DN 50 400 bar 400 l/min
For anyone designing or overhauling a hydraulic press, the Hydraut HYR200 filling valve DN 50 is a simple way to speed up the working cycle. On suction, oil flows from the tank side (IN) to the cylinder side (OUT), while during pressing the conical-seat poppet shuts the passage tightly. It can be installed either vertically or horizontally.
Technical features:
- Nominal size DN 50 with maximum flow of 400 l/min
- Maximum operating pressure: 400 bar
- Opening ratio: 4.2:1
- Pilot pressure: minimum 8 bar, maximum 100 bar
- Minimum suction opening pressure: 0.12 bar ±10%
- Pilot volume: 4.91 cm³
- Connections: IN port on tank side, OUT port on cylinder side, PP pilot port and P auxiliary pressure port
- P and PP port thread: 1/4" BSP
- Pilot port extension included in the supply
- Conical poppet seat preventing leakage during pressing
- Steel construction suited to intensive cycles
- NBR seals with KANTSEAL square ring DKAR00236-N90
- Vertical or horizontal mounting
- Available on request with 1 or 2 flanges (1FL and 2FL versions)
- Body outer diameter: 128 mm
- Fluid temperature: -20 °C to +75 °C
- Weight: 2.5 kg
- 24-month Hydraut warranty
Typical applications:
- cold and hot forming presses
- blanking presses
- composite material presses
- powder compaction presses
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | HYDRAUT |
| Series | HYR |
| Type | VALVOLA DI RIEMPIMENTO |
| Maximum pressure (bar) | 400 |
| Maximum flow rate (l/min) | 400 |
| Seal materials | NBR |
| Mounting interface | DN 50 |