Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
HYDRAUT
HYR112 Filling Valve DN 40 400 bar 250 l/min
The HYR112 is a Hydraut DN 40 filling valve that reliably handles large oil flows between tank and cylinder. The conical seat of the poppet ensures perfect sealing during pressing, while pilot-operated opening allows fast oil discharge to the tank at the end of the cycle. It can be installed either vertically or horizontally.
Technical features:
- Nominal size DN 40 with maximum flow of 250 l/min
- Maximum operating pressure: 400 bar
- Opening ratio: 3.9:1
- Pilot pressure: minimum 8 bar, maximum 100 bar
- Minimum suction opening pressure: 0.12 bar ±10%
- Pilot volume: 2.36 cm³
- Connections: IN port on tank side, OUT port on cylinder side, PP pilot port and P auxiliary pressure port
- P and PP port thread: 1/4" BSP
- Pilot port extension included in the supply
- Conical-seat poppet for perfect sealing
- Steel valve body
- NBR seals with KANTSEAL square ring DKAR00231-N90
- Vertical or horizontal mounting
- Available on request with 1 or 2 flanges (1FL and 2FL versions)
- Body outer diameter: 108 mm
- Fluid temperature: -20 °C to +75 °C
- Weight: 1.7 kg
- 24-month Hydraut warranty
Typical applications:
- hydraulic compression presses
- press brakes
- cold and hot forming presses
- blanking presses
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | HYDRAUT |
| Series | HYR |
| Type | VALVOLA DI RIEMPIMENTO |
| Maximum pressure (bar) | 400 |
| Maximum flow rate (l/min) | 250 |
| Seal materials | NBR |
| Mounting interface | DN 40 |