Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
BOSCH REXROTH
A2FO80/61R-VAB05 Fixed Displacement Piston Pump 80.4 cm³/rev 450 bar
Within the Bosch Rexroth A2FO range, the A2FO80/61R-VAB05 sits among the large displacements: a fixed displacement hydraulic pump with 80.4 cm³/rev and up to 140 l/min of flow. Its nominal pressure of 400 bar makes it a good fit for hydrostatic drives in mobile and industrial applications.
Technical features:
- Bosch Rexroth A2FO series (series 6): fixed displacement axial piston pump, bent axis design, for open circuits
- Displacement: 80.4 cm³/rev
- Maximum flow: 140 l/min at 1800 rpm (3% volumetric loss included)
- Nominal pressure: 400 bar – peak pressure: 450 bar
- Maximum speed: 1800 rpm at 1 bar absolute inlet pressure, up to 3350 rpm with increased inlet pressure
- Maximum power: 96 kW – permissible torque: 508 Nm (Δp = 400 bar)
- Direction of rotation: clockwise, viewed on shaft end
- Shaft: splined DIN 5480 W40x2x30x18x9g
- Mounting flange: ISO 3019/2 4-hole, pilot Ø 140 mm
- Suction port S: SAE 1 1/4" at rear (standard series)
- Pressure ports A/B: SAE 1" at side (6000 psi high pressure series), metric fixing screws
- Drain ports T1/T2: M18x1.5 (one port plugged)
- Seals: FKM, shaft seal rated from -25 °C to +115 °C
- Maximum permissible radial force on the shaft: 11500 N
- Approximate weight: 23 kg
- Optimised efficiency and displacements chosen to match practically every application
- Output flow proportional to drive speed and displacement
Typical applications:
- Excavators and earthmoving machinery
- Truck-mounted hydraulic cranes
- Agricultural machinery and tractors
- Industrial hydraulic power units
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | BOSCH REXROTH |
| Series | A2FO |
| Type | FIXED DISPLACEMENT PISTON PUMP |
| Nominal pressure (bar) | 400 |
| Peak pressure (bar) | 450 |
| Displacement (cm³/rev) | 80.4 |
| Rotation | RIGHT |
| Maximum speed (rpm) | 3350 |
| Drain | M18x1.5 |
| Seal materials | FKM |
| Mounting flange | ISO 3019/2 Ø 140mm 4B |
| Mounting hole thread (in/out ports) | METRIC |
| Shaft type | DIN5480 W40x2x18x9g |