Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
BOSCH REXROTH
A2FO80/61R-PPB05 Fixed Displacement Piston Pump 80.4 cm³/rev 400 bar
Designed for mobile and industrial use, the A2FO80/61R-PPB05 is a Bosch Rexroth axial piston pump that converts mechanical power into hydraulic flow with high efficiency. With 80.4 cm³/rev and 350 bar nominal pressure, it supplies open circuit consumers consistently and reliably.
Technical features:
- Bosch Rexroth A2FO series (series 6): fixed displacement axial piston pump, bent axis design, for open circuits
- Displacement: 80.4 cm³/rev
- Maximum flow: 140 l/min at 1800 rpm (3% volumetric loss included)
- Nominal pressure: 350 bar – peak pressure: 400 bar
- Maximum speed: 1800 rpm at 1 bar absolute inlet pressure, up to 3350 rpm with increased inlet pressure
- Maximum power: 84 kW – permissible torque: 445 Nm (Δp = 350 bar)
- Direction of rotation: clockwise, viewed on shaft end
- Shaft: parallel Ø 35 mm with key DIN 6885 AS 10x8x56
- Mounting flange: ISO 3019/2 4-hole, pilot Ø 140 mm
- Suction port S: SAE 1 1/4" at rear (standard series)
- Pressure ports A/B: SAE 1" at side (6000 psi high pressure series), metric fixing screws
- Drain ports T1/T2: M18x1.5 (one port plugged)
- Seals: NBR, shaft seal rated from -40 °C to +90 °C
- Maximum permissible radial force on the shaft: 11500 N
- Approximate weight: 23 kg
- With radial loads on the shaft (pinion, belt drive) the nominal pressure must be reduced to 315 bar
- Output flow proportional to drive speed and displacement
- Optimum operating viscosity 16–36 mm²/s, minimum filtration class 9 NAS 1638 (18/15 ISO 4406)
Typical applications:
- Machine tools and production lines
- Woodworking plants
- Industrial lifting systems
- Open circuit hydrostatic drives
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | BOSCH REXROTH |
| Series | A2FO |
| Type | FIXED DISPLACEMENT PISTON PUMP |
| Nominal pressure (bar) | 400 |
| Peak pressure (bar) | 450 |
| Displacement (cm³/rev) | 80.4 |
| Rotation | RIGHT |
| Maximum speed (rpm) | 3350 |
| Drain | M18x1.5 |
| Seal materials | NBR |
| Mounting flange | ISO 3019/2 Ø 140mm 4B |
| Mounting hole thread (in/out ports) | METRIC |
| Shaft type | CYLINDRICAL Ø 35 mm |