Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
BOSCH REXROTH
A2FO63/61R-VBB05 Fixed Displacement Piston Pump 63 cm³/rev 400 bar
A displacement of 63 cm³/rev, a peak pressure of 400 bar and clockwise rotation are the key figures of the A2FO63/61R-VBB05, a bent axis pump from the Bosch Rexroth A2FO series. Suited to open circuits, it combines one-piece pistons with piston rings and a rugged design for long service in demanding conditions.
Technical features:
- Bosch Rexroth A2FO series (series 6): fixed displacement axial piston pump, bent axis design, for open circuits
- Displacement: 63 cm³/rev
- Maximum flow: 122 l/min at 2000 rpm (3% volumetric loss included)
- Nominal pressure: 350 bar – peak pressure: 400 bar
- Maximum speed: 2000 rpm at 1 bar absolute inlet pressure, up to 3750 rpm with increased inlet pressure
- Maximum power: 74 kW – permissible torque: 350 Nm (Δp = 350 bar)
- Direction of rotation: clockwise, viewed on shaft end
- Shaft: parallel Ø 35 mm with key DIN 6885 AS 10x8x50
- Mounting flange: ISO 3019/2 4-hole, pilot Ø 125 mm
- Suction port S: SAE 1" at rear (standard series)
- Pressure ports A/B: SAE 3/4" at side (6000 psi high pressure series), metric fixing screws
- Drain ports T1/T2: M18x1.5 (one port plugged)
- Seals: FKM, shaft seal rated from -25 °C to +115 °C
- Maximum permissible radial force on the shaft: 10300 N
- Approximate weight: 18 kg
- For pulsating loads above 315 bar the manufacturer recommends the splined shaft version
- Runs on mineral oil and HFB, HFC, HFD fluids (not suitable for HFA)
- Optimised efficiency and displacements chosen to match practically every application
Typical applications:
- Vehicles with power take-off (PTO)
- Refuse compactors and municipal equipment
- Tipper bodies
- Aerial work platforms
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | BOSCH REXROTH |
| Series | A2FO |
| Type | FIXED DISPLACEMENT PISTON PUMP |
| Nominal pressure (bar) | 400 |
| Peak pressure (bar) | 450 |
| Displacement (cm³/rev) | 63 |
| Rotation | RIGHT |
| Maximum speed (rpm) | 3750 |
| Drain | M18x1.5 |
| Seal materials | FKM |
| Mounting flange | ISO 3019/2 Ø 125mm 4B |
| Mounting hole thread (in/out ports) | METRIC |
| Shaft type | CYLINDRICAL Ø 35 mm |