Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
BOSCH REXROTH
A2FO45/61R-VPB05 Fixed Displacement Piston Pump 45.6 cm³/rev 400 bar
When a system needs steady flow and high pressure in a small envelope, the A2FO45/61R-VPB05 is a practical choice: a Bosch Rexroth A2FO piston pump with a fixed displacement of 45.6 cm³/rev. It reaches 99 l/min at maximum rated speed and offers a favourable power-to-weight ratio for both mobile machines and stationary systems.
Technical features:
- Bosch Rexroth A2FO series (series 6): fixed displacement axial piston pump, bent axis design, for open circuits
- Displacement: 45.6 cm³/rev
- Maximum flow: 99 l/min at 2240 rpm (3% volumetric loss included)
- Nominal pressure: 350 bar – peak pressure: 400 bar
- Maximum speed: 2240 rpm at 1 bar absolute inlet pressure, up to 4250 rpm with increased inlet pressure
- Maximum power: 60 kW – permissible torque: 254 Nm (Δp = 350 bar)
- Direction of rotation: clockwise, viewed on shaft end
- Shaft: parallel Ø 30 mm with key DIN 6885 AS 8x7x50
- Mounting flange: ISO 3019/2 4-hole, pilot Ø 125 mm
- Suction port S: SAE 1" at rear (standard series)
- Pressure ports A/B: SAE 3/4" at side (6000 psi high pressure series), metric fixing screws
- Drain ports T1/T2: M18x1.5 (one port plugged)
- Seals: FKM, shaft seal rated from -25 °C to +115 °C
- Maximum permissible radial force on the shaft: 8150 N
- Approximate weight: 13.5 kg
- With radial loads on the shaft (pinion, belt drive) the nominal pressure must be reduced to 315 bar
- Favourable power-to-weight ratio with a compact, economical design
- Runs on mineral oil and HFB, HFC, HFD fluids (not suitable for HFA)
Typical applications:
- Forestry machines and wood chippers
- Road sweepers
- Drilling rigs and boring machines
- Hydraulic winches
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | BOSCH REXROTH |
| Series | A2FO |
| Type | FIXED DISPLACEMENT PISTON PUMP |
| Nominal pressure (bar) | 400 |
| Peak pressure (bar) | 450 |
| Displacement (cm³/rev) | 45.6 |
| Rotation | RIGHT |
| Maximum speed (rpm) | 4250 |
| Drain | M18x1.5 |
| Seal materials | FKM |
| Mounting flange | ISO 3019/2 Ø 125mm 4B |
| Mounting hole thread (in/out ports) | METRIC |
| Shaft type | CYLINDRICAL Ø 30 mm |