Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
BOSCH REXROTH
A2FO23/61R-VAB05 Fixed Displacement Piston Pump 22.9 cm³/rev 450 bar
One-piece pistons with piston rings, shaft bearings sized for long service life and an excellent power-to-weight ratio: the A2FO23/61R-VAB05 sums up the strengths of the A2FO fixed displacement pump. It delivers up to 56 l/min from a displacement of 22.9 cm³/rev with clockwise rotation.
Technical features:
- Bosch Rexroth A2FO series (series 6): fixed displacement axial piston pump, bent axis design, for open circuits
- Displacement: 22.9 cm³/rev
- Maximum flow: 56 l/min at 2500 rpm (3% volumetric loss included)
- Nominal pressure: 400 bar – peak pressure: 450 bar
- Maximum speed: 2500 rpm at 1 bar absolute inlet pressure, up to 4750 rpm with increased inlet pressure
- Maximum power: 38 kW – permissible torque: 144 Nm (Δp = 400 bar)
- Direction of rotation: clockwise, viewed on shaft end
- Shaft: splined DIN 5480 W30x2x30x14x9g
- Mounting flange: ISO 3019/2 4-hole, pilot Ø 100 mm
- Suction port S: SAE 3/4" at rear (standard series)
- Pressure ports A/B: SAE 1/2" at side (6000 psi high pressure series), metric fixing screws
- Drain ports T1/T2: M16x1.5 (one port plugged)
- Seals: FKM, shaft seal rated from -25 °C to +115 °C
- Maximum permissible radial force on the shaft: 4300 N
- Approximate weight: 9.5 kg
- Favourable power-to-weight ratio with a compact, economical design
- Runs on mineral oil and HFB, HFC, HFD fluids (not suitable for HFA)
Typical applications:
- Marine and offshore applications
- Deck cranes and winches
- Port handling equipment
- Power units for stationary plants
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | BOSCH REXROTH |
| Series | A2FO |
| Type | FIXED DISPLACEMENT PISTON PUMP |
| Nominal pressure (bar) | 400 |
| Peak pressure (bar) | 450 |
| Displacement (cm³/rev) | 22.9 |
| Rotation | RIGHT |
| Maximum speed (rpm) | 4750 |
| Drain | M16x1.5 |
| Seal materials | FKM |
| Mounting flange | ISO 3019/2 Ø 100mm 4B |
| Mounting hole thread (in/out ports) | METRIC |
| Shaft type | DIN5480 W30x2x14x9g |