Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
BOSCH REXROTH
A2FO200/63R-VBB05 Fixed Displacement Piston Pump 200 cm³/rev 400 bar
The Bosch Rexroth A2FO200/63R-VBB05 pump packs the robustness of bent axis piston technology into a compact housing. With 200 cm³/rev, 350 bar nominal and 400 bar peak pressure, it is an effective solution for open circuit hydraulic systems that require a fixed flow.
Technical features:
- Bosch Rexroth A2FO series (series 6): fixed displacement axial piston pump, bent axis design, for open circuits
- Displacement: 200 cm³/rev
- Maximum flow: 304 l/min at 1550 rpm (3% volumetric loss included)
- Nominal pressure: 350 bar – peak pressure: 400 bar
- Maximum speed: 1550 rpm at 1 bar absolute inlet pressure, up to 2750 rpm with increased inlet pressure
- Maximum power: 181 kW – permissible torque: 1114 Nm (Δp = 350 bar)
- Direction of rotation: clockwise, viewed on shaft end
- Shaft: parallel Ø 50 mm with key DIN 6885 AS 14x9x70
- Mounting flange: ISO 3019/2 4-hole, pilot Ø 200 mm
- Suction port S: SAE 3 1/2" at rear (standard series)
- Pressure ports A/B: SAE 1 1/4" at side (6000 psi high pressure series), metric fixing screws
- Drain ports T1/T2: M22x1.5 (one port plugged)
- Seals: FKM, shaft seal rated from -25 °C to +115 °C
- Maximum permissible radial force on the shaft: 22900 N
- Approximate weight: 66 kg
- For pulsating loads above 315 bar the manufacturer recommends the splined shaft version
- Runs on mineral oil and HFB, HFC, HFD fluids (not suitable for HFA)
- Optimised efficiency and displacements chosen to match practically every application
Typical applications:
- Recycling machines and shredders
- Scrap presses and balers
- Hydraulically driven conveyors
- Quarrying and crushing plants
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | BOSCH REXROTH |
| Series | A2FO |
| Type | FIXED DISPLACEMENT PISTON PUMP |
| Nominal pressure (bar) | 400 |
| Peak pressure (bar) | 450 |
| Displacement (cm³/rev) | 200 |
| Rotation | RIGHT |
| Maximum speed (rpm) | 2750 |
| Drain | M22x1.5 |
| Seal materials | FKM |
| Mounting flange | ISO 3019/2 Ø 200mm 4B |
| Mounting hole thread (in/out ports) | METRIC |
| Shaft type | CYLINDRICAL Ø 50 mm |