Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
BOSCH REXROTH
A2FO16/61R-VAB06 Fixed Displacement Piston Pump 16 cm³/rev 450 bar
A displacement of 16 cm³/rev, a peak pressure of 450 bar and clockwise rotation are the key figures of the A2FO16/61R-VAB06, a bent axis pump from the Bosch Rexroth A2FO series. Suited to open circuits, it combines one-piece pistons with piston rings and a rugged design for long service in demanding conditions.
Technical features:
- Bosch Rexroth A2FO series (series 6): fixed displacement axial piston pump, bent axis design, for open circuits
- Displacement: 16 cm³/rev
- Maximum flow: 49 l/min at 3150 rpm (3% volumetric loss included)
- Nominal pressure: 400 bar – peak pressure: 450 bar
- Maximum speed: 3150 rpm at 1 bar absolute inlet pressure, up to 6000 rpm with increased inlet pressure
- Maximum power: 34 kW – permissible torque: 100 Nm (Δp = 400 bar)
- Direction of rotation: clockwise, viewed on shaft end
- Shaft: splined DIN 5480 W25x1.25x30x18x9g
- Mounting flange: ISO 3019/2 4-hole, pilot Ø 80 mm
- Suction port S: threaded M33x2 at rear
- Pressure ports A/B: threaded M22x1.5 at side
- Drain ports T1/T2: M12x1.5 (one port plugged)
- Seals: FKM, shaft seal rated from -25 °C to +115 °C
- Maximum permissible radial force on the shaft: 3700 N
- Approximate weight: 5.4 kg
- Output flow proportional to drive speed and displacement
- Optimum operating viscosity 16–36 mm²/s, minimum filtration class 9 NAS 1638 (18/15 ISO 4406)
Typical applications:
- Vehicles with power take-off (PTO)
- Refuse compactors and municipal equipment
- Tipper bodies
- Aerial work platforms
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | BOSCH REXROTH |
| Series | A2FO |
| Type | FIXED DISPLACEMENT PISTON PUMP |
| Nominal pressure (bar) | 400 |
| Peak pressure (bar) | 450 |
| Displacement (cm³/rev) | 16 |
| Rotation | RIGHT |
| Maximum speed (rpm) | 6000 |
| Drain | M12x1.5 |
| Seal materials | FKM |
| Mounting flange | ISO 3019/2 Ø 80mm 4B |
| Mounting hole thread (in/out ports) | METRIC |
| Shaft type | DIN5480 W25x1.25X18X9g |