Images are for illustrative purposes only. Please refer to the data sheet for exact specifications.
BOSCH REXROTH
A2FO10/61R-PBB06 Fixed Displacement Piston Pump 10.3 cm³/rev 400 bar
Within the Bosch Rexroth A2FO range, the A2FO10/61R-PBB06 sits among the small displacements: a fixed displacement hydraulic pump with 10.3 cm³/rev and up to 32 l/min of flow. Its nominal pressure of 350 bar makes it a good fit for hydrostatic drives in mobile and industrial applications.
Technical features:
- Bosch Rexroth A2FO series (series 6): fixed displacement axial piston pump, bent axis design, for open circuits
- Displacement: 10.3 cm³/rev
- Maximum flow: 32 l/min at 3150 rpm (3% volumetric loss included)
- Nominal pressure: 350 bar – peak pressure: 400 bar
- Maximum speed: 3150 rpm at 1 bar absolute inlet pressure, up to 6000 rpm with increased inlet pressure
- Maximum power: 19 kW – permissible torque: 57 Nm (Δp = 350 bar)
- Direction of rotation: clockwise, viewed on shaft end
- Shaft: parallel Ø 25 mm with key DIN 6885 AS 8x7x32
- Mounting flange: ISO 3019/2 4-hole, pilot Ø 80 mm
- Suction port S: threaded M33x2 at rear
- Pressure ports A/B: threaded M22x1.5 at side
- Drain ports T1/T2: M12x1.5 (one port plugged)
- Seals: NBR, shaft seal rated from -40 °C to +90 °C
- Maximum permissible radial force on the shaft: 2350 N
- Approximate weight: 5.4 kg
- For pulsating loads above 315 bar the manufacturer recommends the splined shaft version
- Shaft bearings designed for the service life expected in mobile and industrial use
- Minimum inlet pressure 0.8 bar absolute, maximum case pressure 10 bar absolute
Typical applications:
- Excavators and earthmoving machinery
- Truck-mounted hydraulic cranes
- Agricultural machinery and tractors
- Industrial hydraulic power units
TECHNICAL DETAILS
Features and data sheet
| Manufacturer | BOSCH REXROTH |
| Series | A2FO |
| Type | FIXED DISPLACEMENT PISTON PUMP |
| Nominal pressure (bar) | 400 |
| Peak pressure (bar) | 450 |
| Displacement (cm³/rev) | 10.3 |
| Rotation | RIGHT |
| Maximum speed (rpm) | 6000 |
| Drain | M12x1.5 |
| Seal materials | NBR |
| Mounting flange | ISO 3019/2 Ø 100mm 4B |
| Mounting hole thread (in/out ports) | METRIC |
| Shaft type | CYLINDRICAL Ø 25 mm |